Sanding

Purpose:  To remove gloss from previous paint jobs, smooth out imperfections, and prepare walls for a new finish.

Process:  We sand rough areas and newly repaired plaster with fine sandpaper, focusing on achieving a smooth, even surface that will hold paint or other treatments well.

Scraping

Purpose:  To remove loose, peeling paint or plaster, which can interfere with the adhesion of new treatments.

Process:  We use specialized tools to scrape away any loose material, ensuring a clean surface for new applications.

Plaster repair

Purpose:  To mend cracks, holes, or other damage in plaster walls or ceilings.

Process:  After removing loose plaster, we apply a patching compound, smooth it out, and allow it to dry before sanding to a finish that matches the surrounding area.

Cleaning

Purpose:  To remove dust, grease, or mildew, ensuring a clean surface for painting.

Process:  We clean walls with a mild detergent solution, and for mildew, we use a bleach-based cleaner or an anti-mildew treatment to ensure a fresh start.

Applying Primer

Purpose:  To seal the surface, cover stains, and provide a uniform base for paint.

Process:  Depending on the surface condition, we might use a stain-blocking primer for stains or a general-purpose primer for most interior surfaces, ensuring even paint coverage.

Anti-Mildew Treatment

Purpose:  To prevent the growth of mildew in moisture-prone areas like bathrooms and kitchens.

Process:  After cleaning, we apply an anti-mildew treatment, which helps to inhibit future mildew growth, especially important in humid environments.

Caulking

Purpose:  To seal gaps around trim, baseboards, windows, and doors, preventing drafts and moisture ingress.

Process:  We apply a high-quality, paintable caulk to fill in gaps, smoothing it with a tool for a neat finish before painting.

Spackling

Purpose:  To fill in small holes, dents, or cracks in drywall before painting.

Process:  We apply spackling compound, let it dry, then sand it down to a smooth finish, ensuring no imperfections show through the paint.

Masking

Purpose:  To protect areas not intended for painting, like trim, windows, and floors.

Process:  Using painter's tape and plastic sheets, we carefully mask off areas to ensure clean lines and protect surfaces from paint splatter.

Sanding

Purpose:  To smooth out rough surfaces, remove old, flaking paint, and provide a good base for new paint or stains.

Process:  We use fine to medium grit sandpaper to sand down wooden structures like decks, fences, and pergolas, ensuring an even texture for optimal adhesion.

Scraping

Purpose:  To remove loose, peeling paint or plaster, which can interfere with the adhesion of new treatments.

Process:  Using scrapers, we carefully remove all loose material, paying special attention to edges and corners where paint or plaster often peels first.